Introduction

This article offers an introduction and overview of how to get started with mounting your QuickTalker Freestyle.

First you’ll need to identify which mounting solution is compatible with your QuickTalker Freestyle. For more information on how to identify which model you have, please visit our mounting guide here.

Getting Started

The videos below offer an introduction and overview of how to set up your QuickTalker Freestyle with the correct mount for your device. They will guide you through initial setup, including attaching the mounting plate or cradle to your device and using the One mounting arm.

Mounting With AMPS Mount For One

To use your AMPS Mount for One, follow these steps:

1. Place the mounting plate on the back of the kickstand, aligning it with the four threaded holes.
2. Insert and tighten the four included screws.
3. Secure the One mounting arm to a tabletop, wheelchair, or other desired surface.
4. Loosen the thumb screw on the mounting plate so it no longer extends into the center hole.
5. Slide the mounting plate bracket onto the One mounting arm.
6. Tighten the thumb screw to secure the device in place.

Mounting With One Mounting Cradle

To use your One Mounting Cradle, follow these steps:

1. Align the cutout on the mounting cradle with the kickstand shape on the back of your QuickTalker Freestyle.
2. Clip one side of the mount onto the device.
3. Push down firmly on the other edge until you hear it snap into place.
4. Ensure that the mounting cradle wraps around both front edges of the device.

Additional Resource Links

• QuickTalker Freestyle Mounting Support Hub
• QuickTalker Freestyle Accessories Support Hub
• One Mounting Arm Support Hub