Summary🔗

The Big Beamer is a wireless switch that brings reliable, immediate switch access without the hassle of cords. This guide will cover how to connect the Big Beamer using either an AbleNet Original Wireless Receiver or the AbleNet PowerLink 4.

Required Items🔗

Instructions🔗

The instructions below will show you how to connect to either an Original Wireless Receiver or a PowerLink 4.

Connecting a Big Beamer to an Original Wireless Receiver 🔗

  1. Insert new batteries into the Big Beamer Transmitter and Original Receiver. 
  2. Turn ON both the Big Beamer Transmitter and Original Receiver
  3. Enter pairing mode by pressing and holding the Test button on the Original Receiver for about 5 seconds or until the LED turns green.
  4. Press the switch on top of the Big Beamer to link it to the receiver.
    • Please note that you may repeat this step for additional transmitters (up to 8 transmitters can be paired to a single receiver).
  5. Exit pairing mode by pressing the pairing button on the Original Receiver once.

Now your receiver and Big Beamer are ready to be used!

  1. Connect a PowerLink4 to a power outlet.
  2. Insert new batteries into the Big Beamer Transmitter.
  3. Turn the PowerLink4 ON.
  4. PowerLink4 has two independent sides that can be activated by a switch. Choose the side that you want to control with the Big Beamer, then press and hold that side’s Status button for about 5 seconds or until the LED next to it turns Green to enter pairing mode.
  5. Press the switch on top of the Big Beamer to link it to the PowerLink4.
    • Please note that you may repeat this step for additional transmitters (up to 8 transmitters per side can be paired to a PowerLink4).
  6. Press the Status button on the PowerLink4 once to exit the pairing mode.

Your PowerLink4 and Big Beamer are ready to be used!

Tips and Troubleshooting🔗

For additional information, please visit the Knowledge Base for the Big Beamer

Register and Reach Out🔗

Register your product or get more help from our support teams!

Still need more help?

Get Help