Introduction🔗

The video below offers an introduction and overview of how to use the BIGmack speech device. It will guide you through initial setup, including adding a battery and recording a message.

Advanced Features🔗

In addition, the video below covers the advanced functionalities of the BIGmack. Here are the topics covered and their video timestamps:

0:00 – Intro
0:23 – Using Overlays with the BIGmack
0:36 – Using Alternate Switch Caps with the BIGmack
1:05 – Using an External Switch with the BIGmack
1:36 – Controlling Toys or Appliances with the BIGmack

Additional Resource Links🔗

• BIGmack Quick Start Guide
• BIGmack Instructions for Use
• Blank Overlays
• AT Resource Hub for activities and curriculum featuring this device

Tips and Troubleshooting🔗

LED Light Indicator 🔗

The LED positioned above the record switch displays the status of the BIGmack. Here are the LED colors and light patterns for each status:

• Red LED
  • Four flashes in a row – the battery is low
  • Steady for 1 second – the device is powered on
  • Steady – the device is in record mode
  • Continuous flashing – a message is being recorded
  • Single flash – a message is being played
  • Flashing, followed by audible warbled beep – the device’s memory has been cleared
• Yellow LED
  • Steady for 1 second – the device has no recorded message
  • Flashing (while in Record mode) – the device’s memory/ storage is full

Battery🔗

We recommend always using regular, alkaline batteries to avoid any issues with recording or playing messages. Batteries labeled “Heavy Duty,” “Industrial Grade,” or “ProCell” handle power differently than regular alkaline batteries. When used in our devices they behave similar to low or dead batteries.

Additionally, Make sure your battery is new and recently purchased. Used batteries from other devices or batteries that have been sitting for a while may lack the power to operate the switch correctly.

The video below demonstrates how to install a 9V battery into the device. 

Additional Support🔗

Please visit the BIGmack Knowledge Base for additional support resources. If you have any additional questions, please contact the ableCARE Product Success Team for further assistance.

Don’t Forget to Register Your Product🔗

Registering your product provides access to ableCARE, product updates, and resources for your product. Click here to visit our product registration page to get started.