Summary🔗

This article provides troubleshooting steps for the Big Candy Corn Switch if it is not activating a device. It covers checking connections, ensuring the controlled device has power, and identifying low battery indicators on the switch.

Causes🔗

• Cause 1 – The ⅛” (3.5mm) mono connector is not fully inserted.
• Cause 2 – The device being controlled is powered off.
• Cause 3 – The device being controlled has low or depleted batteries.
• Cause 4 -The Big Candy Corn Switch has a low internal battery.

Solutions🔗

• Solution 1 – Ensure the plug is fully inserted into the device’s switch port. Remove and reinsert it to confirm a secure connection.
• Solution 2 – Turn on the device and verify it functions properly before testing the switch again.
• Solution 3 – Replace the batteries with brand-new ones, as weak batteries may not provide enough power for proper operation.
• Solution 4 – If the switch’s LEDs flash red, this indicates a low battery. Replace the internal CR2430 battery and test the switch again.

Please visit the Big Candy Corn Support Hub for additional support resources. If you have any additional questions, please contact the ableCARE Product Success Team for further assistance.