Attach a mount to your QuickTalker Freestyle so you can use it on a wheelchair, tabletop, or bed. The mount you need depends on the kickstand on the back of your device.

Before You Begin

Is this article right for your device?

This article applies to the standard size QuickTalker Freestyle, which has a 10.2-inch or 11-inch display.

• If you have a QuickTalker Freestyle Mini, which has an 8.3-inch display, see QuickTalker Freestyle Mini Mounting instead.

Which Mounting Plate Do I need?

All QuickTalker Freestyles are compatible with the One Mounting Arm, but different device types need different mounting plates.

Your device works with the AMPS Mount for One if it has:

• One or more QR codes on the kickstand
• Four threaded holes on the kickstand

Your device works with the One Mounting Cradle if it has:

• A round silver MagConnect attachment on the kickstand
• No QR codes or threaded holes

Attach the AMPS Mount for One

Use the One Mount with the AMPS Mount for One for quick, flexible mounting on wheelchairs, tabletops, beds, and more.

1. Place the mounting plate on the back of the kickstand, lining it up with the four threaded holes.
2. Insert the four included screws, then tighten them.
3. Attach the One mounting arm to a tabletop, wheelchair, or other surface.
4. Loosen the thumb screw on the mounting plate until it no longer sticks out into the center hole.
5. Slide the mounting plate bracket onto the One mounting arm.
6. Tighten the thumb screw to hold the device in place.

Attach the One Mounting Cradle

Use the One Mount with the One Mounting Cradle for flexible mounting on wheelchairs, tabletops, beds, and more.

1. Line up the cutout on the mounting cradle with the kickstand shape on the back of your device.
2. Clip one side of the cradle onto the device.
3. Push down firmly on the other edge until you hear it snap into place.
4. Check that the cradle wraps around both front edges of the device.

QuickTalker Freestyle Mounting FAQs

Is QuickTalker Freestyle compatible with Rehadapt mounts?

Yes. A QuickTalker Freestyle that has 4 threaded inserts on the kickstand, is compatible with Rehadapt mounting systems when you buy the Rehadapt Universal Device Socket.

The Universal Device Socket:

• Attaches with three screws to the threaded inserts on the QuickTalker Freestyle kickstand. See image below for a visual example.
• Slides directly into the receiver on the end of a Rehadapt mounting arm

What size screw is used with the Standard and Mini QuickTalker Freestyle and the AMPS Mount for One?

The threaded inserts on the back of the QuickTalker Freestyle and the QuickTalker Freestyle Mini use a 10-32 screw and accept a maximum screw depth of 1/4-in (6.35-mm). The four threaded inserts use the 4-hole AMPS pattern and are spaced 38mm x 30mm from center to center.

The depth of the screw will vary based on the mounting plate that you use. The AMPS Plate uses a 10-32 X 7/16″ long screw.