Summary

The LITTLE Step-by-Step indicator LED can flash yellow. If you see it flash yellow one time and it doesn’t play your message, this may indicate that a message is not recorded on your device.

Causes

Messages may have not yet been recorded, or they may have been erased, causing the LITTLE Step-by-Step LED to flash yellow.

Solutions

Try to record a new message on your LITTLE Step-by-Step following these steps:

1. Ensure you’ve properly installed a new, 9V Alkaline battery into your device.
2. Turn the device on.
3. Press and hold the Record button on the back of the device until the LED lights up solid Red, then release the switch.
4. Press and hold down the main switch top of your device. The LED will flash Red when recording.
5. Speak your message into the communication device, then release the switch top to complete the recording.
6. When finished, press the Record button one time to exit record mode.

You may now press the switch top of your device one time, and you should hear your first recording. 

Next Steps

For additional information on LITTLE Step-by-Step, please visit the product Support Hub.

If the problem persists, please contact the ableCARE Product Success Team for further assistance.