How to secure the switch top on your device

Summary

If the switch top on your device becomes loose or detaches during use, you can secure it with a small amount of semi-permanent adhesive. This will add resistance to help hold the switch top in place, preventing it from coming off easily.

Required Items

• One of the following adhesive options:
  • Elmer’s School Glue
  • Hot glue from a hot glue crafting gun
  • Thread seal tape (plumber’s tape)
  • Removable mounting or poster putty
• Optional: A small applicator (e.g., a cotton swab for glue)
• Optional: Scissors or utility knife (if using thread seal tape)

Instructions

Action: Remove the switch top by gently unscrewing or pulling it off.
Expected Result: The cap should detach easily, exposing the switch threads.

Action: Choose and apply a small amount of adhesive to the switch threads.

• If using glue or putty, apply a thin layer directly to the threads.
• If using thread seal tape, wrap a small section around the threads.
  Expected Result: The adhesive should provide light resistance without excessive buildup.

Action: Reattach the switch top by pressing or screwing it back into place.
Expected Result: The switch top should fit securely with added resistance from the adhesive.

Action: Allow the adhesive to set as recommended by the manufacturer.
Expected Result: The switch top should now stay in place more firmly during use.

Tips and Troubleshooting

• If the switch top is still loose: Apply a slightly thicker layer of adhesive or additional thread seal tape.
• If too much adhesive was applied: Wipe off excess glue before it dries, or trim excess tape if needed.
• For a temporary hold: Use mounting putty, which allows for easy removal if needed in the future.

If you have additional questions, please contact AbleNet’s ableCARE Product Success Team.