The Mode button on the back will allow you to change the output of the Blue2 Feather Touch. By default, Blue2 switch tops are configured as a keyboard Space and Enter, respectively. Alternate outputs were those most commonly found in switch-accessible software. Choosing a new mode is simple. 

1. On the back of Blue2 FT, move the keyboard command switch to the “on” position.
2. Activate the switch top or the wired switch plugged into blue2 to toggle through the options: Space, Enter, 1, 2,3, 4.
3. Once at the desired command carefully turn Blue2 FT over and move the keyboard command switch back to the off position.
4. Blue2 will now perform that keyboard command when activating the switchtop.

For additional information, please visit the Blue2 FT Support Hub

If you have additional questions, please contact AbleNet’s ableCARE Product Success Team.